Programming assignment #1 - Paint program

CS 248 - Introduction to Computer Graphics
Autumn Quarter, 2000
Marc Levoy
Handout #3


Demos on Monday, October 16

Writeups due on Tuesday, October 17 by 2:00pm


Your assignment is to write a 24-bit paint program that runs on the Sweet Hall SGIs, using the provided user interface package.

Required functionality

  1. Overpainting brush. Implement a simple rectangular overpainting brush as described in handout #4. Allow slider control over the color and size of your brush. For this brush and the tinting brush below, provide two sets of three sliders, one set that controls R, G, and B, and a second set that controls H, S, and V (using the single-hexcone colorspace described in section 13.3.4 of the textbook). Allow either set to be used to select the brush color, but keep the other set consistent on the display.

  2. Tinting brush. Implement a weighted mask-driven tinting brush as described in option 2 at the top of page 3 of handout #4. Allow slider control over the color and size of your brush as described above. Using check boxes, allow the user to select which coordinate(s) are affected: H alone, S alone, V alone, H & S, H & V, S & V, or all three. Non-affected coordinates should remain unchanged. Choose any mask function you like that satisfies the conditions listed at the bottom of page 3 of the handout. Allow slider control over one or more parameters of your function.

  3. Brush visualizations. Draw 1x (actual size) and 4x (enlarged by 4x in both X and Y) visualizations of the current brush in a second canvas. These visualizations should depict the size, shape, and falloff of the brush, and they should be visible regardless of the currently selected brush color. With some creativity, you can also depict the brush color in the visualizations. Update the visualization whenever a related slider is moved. The purpose of these visualizations is to understand the brush shape in its WYSIWYG, spatially discretized glory. Therefore, in the enlarged visualization, one pixel of the actual brush should be displayed as a 4x4 pixel constant-color block; don't interpolate for the sake of the visualization.

Support software

To eliminate X or GL hacking, we provide a software package, xsupport, that displays any number of windows, called canvases, a programmable number of sliders, and several kinds of buttons. You will need at least two canvases, one for your painting and one for your brush shape visualizations. The size of these canvases is programmable. The support package runs on the Sweet Hall graphics lab SGIs, Linux PCs, and most other X-compatible workstations. If you are working on a 24-bit workstation with hardware gamma correction (such as our SGIs), the package allows you to display your 24-bit painting directly. If you are working on an 8-bit color workstation with no hardware gamma correction, the package automatically dithers and gamma corrects your painting prior to display.

The package is described in the file /usr/class/cs248/support/src/xsupport/README.xsupport. Everything you need to know is contained in this file. We recommend you begin the assignment by copying the directory /usr/class/cs248/assignments/assignment1 to somewhere in your home directory structure and modifying the skeleton paint program provided. To use the package, you must program in C or C++. You can develop your paint program on any platform you like, but all demos must be given on a Sweet Hall graphics lab SGI. To help us judge the performance of your program, it should be displaying on the same machine it is executing on during your demo.

Some hints and additional requirements

Submission requirements

There are two parts to submitting your paint program: giving a demo on Monday, October 16, and submitting an online writeup by 2:00pm on Tuesday, October 17.

For the demos, signup sheets will be posted on the door of the Sweet Hall SGI lab a few days before October 16. Sign up for a one-hour slot sometime during which you will be called upon to give a 10-15 minute demo. Some slots will be reserved for SITN students, who therefore don't need to come to campus just to sign up. Other students can sign up for these slots only if all other slots are taken. All demos must be given in the SGI lab. To keep the demos fair, you must freeze your executable at 10:00am on demo day and give your demo from that executable. To freeze your executable, change the current directory to your assignment1 directory and run the script /usr/class/cs248/bin/freeze.

Writeups consist of a commented copy of your source code and a README describing the functionality implemented. Be brief but complete; one screenful is enough. If you did something especially clever, tell us about it. To submit your code and README, change the current directory to your assignment1 directory and run the script /usr/class/cs248/bin/submit.

The assignment will be graded on correctness (40 points), efficiency (20 points), programming style, including your writeup (20 points), and the elegance of your user interface (20 points). Note: the functionality, efficiency, and UI of your program will be graded based only on what you show us during the demo. Functionality you don't show us or that doesn't work will not be considered. Only your writeup and your code will be graded from your submission.

Extra credit

If you have completed the assignment you can earn extra credit by adding bells and whistles. Here are some suggestions. Feel free to make up your own.

  1. Allow interactive manipulation of brush size, shape, and fall-off directly on the visualizations displayed in the second canvas (as an alternative to sliders). Make your interface as intuitive as possible.

  2. Implement a software cursor, used only when the mouse is inside the canvas, that is more suitable for painting than the default arrow cursor. A good cursor would be visible over any image, regardless of color, and it would avoid obscuring too much of the area being painted. Segmentation faults are frowned upon, so remember to clip your cursor to the boundaries of the canvas. You can disable the hardware arrow cursor in xsupport by setting the "DisableHardwareCursor" member of the canvas structure to a non-zero value prior to calling LiftOff().

  3. Implement some fancy brushes, such as a filter brush, smear brush, color cycle brush, or rubber-stamp brush with transparency. We'll describe these and others in the Friday help session for this assignment.

  4. Implement painting on textured paper. Provide some kind of user control over the texture. For inspiration, look at MetaCreations's Painter program.

  5. Implement cloning such as found in MetaCreations's Painter. A good paper on this technique is Paul Haeberli's `Paint By Numbers: Abstract Image Representations,' Computer Graphics (Proc. Siggraph), Vol. 24, No. 4, August, 1990, pp. 207-214.

  6. Implement a fill algorithm from section 19.5 of the textbook. For more fun, implement a soft-filling algorithm.

  7. Implement unlimited undo, allowing the user to "cancel" the effect of any number of brush strokes (from button down to button up). Why unlimited? An artist working rapidly may lay down many brush strokes before realizing that a mistake has been made. Single-stroke undo is seldom sufficient. Some cleverness will be required to avoid excessive memory use.

  8. Record a painting session (multiple brushstrokes), then allow the user to change one or more brush parameters (color, size, shape, etc.), and "replay" the session, yielding a new painting. For extra fun, allow the user to control which brushstrokes are affected by a change. One way to select brushstrokes is to provide slider-controlled playback of the painting session (using your unlimited undo machinery). Another way would be geometrically, using a bounding rectangle or freeform lasso (like Photoshop).

  9. Display in a third canvas the constant H, constant S, and constant V surfaces from a hexcone or other cylindrical colorspace. Allow selection of H, S, and V for your brush from this display. When a value is selected from one of the three surface, update the other two surfaces to display the appropriate slices from the hexcone. For extra credit, add an axonometric or perspective projection of the 3D colorspace showing in color the currently selected constant H, S, and V surfaces.


levoy@cs.stanford.edu
Copyright © 2000 Marc Levoy
Last update: October 3, 2000 06:24:00 PM